Manual abstract:... on using the appliance
Use cookware made from materials that are compatible with the induction principle (ferromagnetic material). We especially recommend pans made from: cast iron, coated steel or special stainless steel adapted for induction. Us ea magnet to test the compatibility of the cookware.
SUITABLE UNSUITABLE
Safety devices
Pan sensor Each cooking zone is fitted with a pan sensor device. The hotplate only emits heat when a pan with suitable measurements for the cooking zone is placed on it. If the indicator light is flashing, it may indicate: an incompatible pan a pan that is too small the pan has been taken away Residual heat indicators
GB
* Cast iron Enamelled steel Special stainless steel Copper, Aluminium, Glass, Earthenware, Ceramic, non magnetic Stainless steel
In addition, to obtain the best results from your hob: Use pans with a thick, flat base to fully utilise the cooking zone.
While the temperature of the cooking zone remains above 60°C, even after the programme has finished, the residual heat indicators placed near the relevant cooking zone remain lit to prevent the risk of burns. Overheating protection If the electronic elements overheat, the hob switches off automatically and appears on the display. When the temperature has reached an appropriate level, this message disappears and the hob may be used again. Safety switch The appliance has a safety switch that automatically switches off the cooking zones when they have been in operation for a certain amount of time at a given power level. When the safety switch has been triggered, the display shows 0. .or example: the right rear hotplate is set to 5 and will switch off after 3 hours of continuous operation, while the front left hotplate is set to 2 and will switch off after 10 hours. Buzzer This can indicate several irregularities: an object (a pan, cutlery, etc.) has been placed on the control panel for more than 10 seconds something has been spilt on the control panel a button has been pressed for too long All the above can cause the buzzer to sound. Remove the cause of the malfunction to stop the buzzer. The control panel locks automatically in these situations: to unlock it press the button [key icon], the settings will have been maintained. If the cause of the problem is not removed, the buzzer will keep sounding and the hob will switch off.
Always use pans with a diameter that is large enough to cover the hotplate fully, in order to use all the available heat.
Make sure that the base of the cookware is always dry and clean, to fully utilise and extend the life of both the cooking zones and cookware. Avoid using the same cookware that has been used on gas burners: the heat concentration on gas burners may deform the base of the pan, causing it not to fit correctly.
...
|
